fbpx

Institute for Advanced Learning and Research

Driving Economic Transformation

U.S. Navy breaks ground on new Regional Training Center (RTC) at IALR Campus

Categories

U.S. Navy breaks ground on new Regional Training Center (RTC) at IALR Campus

U.S. Navy breaks ground on new Regional Training Center (RTC) at IALR Campus

The new center will accommodate full-scale growth of the defense manufacturing training program, providing a pipeline of 800-1,000 skilled workers per year for high-demand jobs.  

The United States Navy broke ground on a new regional training center for the Accelerated Training in Defense Manufacturing (ATDM) program in Danville today. The new 100,000-square-foot training facility, located on the campus of the Institute for Advanced Learning and Research (IALR), will allow more students to enroll in accelerated four-month training programs to help them reskill or upskill for high-paying jobs. Estimated to open by 2025, the Regional Training Center expects to graduate 800-1,000 students per year to fill critical vacancies across the defense industrial base.

The groundbreaking ceremony was held during the annual ATDM & U.S. Navy Additive Manufacturing Center of Excellence (AM CoE) Summit, which gathered the Navy, Office of the Secretary of Defense, state and local officials, and industry partners to increase awareness of these important initiatives and promote participation and contributions by industry and other stakeholders. This year, ATDM instructors and students were joined by Secretary of the U.S. Navy Carlos Del Toro and Rear Admiral Scott W. Pappano to celebrate the success of the past year and discuss goals going forward.

“The incredible progress made over the past year here in Danville, both in building the next generation of submarine builders at ATDM and in advancing the manufacturing technology we need to succeed at AM CoE, proved that we are on the right path. This past year established the foundation for the critical leaps forward we need in the coming years to scale both programs to ensure we have the skilled workforce with the technology and capabilities needed to build the Navy’s next generation of submarines.” — Rear Adm. Pappano, program executive officer, Strategic Submarines, U.S. Navy

“The groundbreaking of the Regional Training Center is a key milestone in scaling ATDM by providing a dedicated training facility with the infrastructure and equipment necessary to reach our full capacity of training potential,” said Dr. Debra Holley, director of the ATDM program.

Darrell Dalton, Chair of the Pittsylvania County Board of Supervisors, remarked that the construction of the Regional Training Center is a “win for our local economy, as it will bring up to 1,000 students a year to Danville and Pittsylvania County, and all of whom will live, work, and play here. By building its training facility in Danville, the Navy has provided a capital investment that further shows the growing prominence of this region in manufacturing and related industry sectors.”

ATDM Summit 2023

“We are especially fortunate that the Navy has recognized the forethought of our local leaders who have worked over the years to create educational programs that emphasize the type of knowledge and skills needed for this program,” Dalton continued.

In partnership with the Industrial Base Analysis and Sustainment Program Office (IBAS) in the Office of the Secretary of Defense (OSD) and the Navy’s Program Executive Office (PEO) Strategic Submarines, ATDM trains workers in critical manufacturing skills to establish a steady and sustainable flow of workers into the SIB/DIB to fill critical skills gaps and labor shortages. The AM CoE directly supports the growth of our nation’s industrial base by using additive manufacturing for the production of submarine components to bolster naval shipbuilding and repair supply chains.

America’s defense industrial base (DIB) is still greatly in need of workers who can build and repair naval ships. The lack of workforce and manufacturing shortfalls in this area impact the material readiness of the current naval fleet; major maintenance and overhaul availability; and new construction. The construction of the “1 COLUMBIA + 2 VIRGINIA” naval ships beginning in FY26 will further stress the Submarine Industrial Base (SIB) and increase the need for qualified talent in the workforce. The AM CoE, which formally opened at last year’s summit, directly supports growth of our nation’s industrial base by scaling and maturing additive manufacturing technologies in the SIB. The technologies enable innovative production of submarine components to bolster naval shipbuilding and repair supply chains. As a result, the AM CoE will increase overall manufacturing capacity and close the supply-demand gap in critical marketspaces like castings, forgings, fittings, and fasteners.

Secretary of the U.S. Navy Carlos Del Toro (right) and Rear Admiral Scott W. Pappano (left) sign a steel beam that will be part of the new ATDM Regional Training Center.

The Institute for Advanced Learning and Research (IALR) has also been selected by the U.S. Navy Program Executive Office, Strategic Submarines (PEO SSBN) as the designated memorial location for the Ex-USS Buffalo (SSN 715) sail and the Ex-USS Providence (SSN 719) rudder to preserve and commemorate the history of these submarines and honor the service of their crews. This memorial demonstrates the strong partnership between the Navy and Accelerated Training in Defense Manufacturing (ATDM).

“Today marks a new chapter in the exciting growth of the ATDM program and further exemplifies the educational, workforce, and technological innovation that is taking place in Virginia. The investments made here are vital to the economic progress of the entire commonwealth,” said Telly Tucker, president of the Institute for Advanced Learning and Research, which leads the multi-year ATDM pilot project. IALR’s Center for Manufacturing Advancement is also home to the Navy’s AM CoE.

“The ATDM program marks a bold step forward,” said Danville City Councilman Lee Vogler. “This initiative stands at the forefront of addressing the challenges facing our defense industrial base and, by extension, our nation’s security.”

The sail was part of the Ex-USS Buffalo (SSN 715), a decommissioned United States Navy LOS ANGELES Class nuclear-powered attack submarine. USS Buffalo (SSN 715) was commissioned in November 1983, and decommissioned in January 2019. During that time, she saw most of her service in the Pacific area of operation.

The rudder hails from Ex-USS Providence (SSN 719), also a decommissioned United States Navy LOS ANGELES Class nuclear-powered attack submarine. Ex-USS Providence (SSN 719) was commissioned in July 1985. In August 2021, USS Providence was transferred from Naval Submarine Base New London in Groton, Conn., to Kitsap Naval Base in Bremerton, Wash., for decommissioning after 37 years of service.

To learn more about the new regional training center, or ATDM program classes and cohorts, please visit www.atdm.org.

About ATDM

Accelerated Training in Defense Manufacturing is a prototype training platform for rapidly training skilled workers in key trades such as CNC machining and welding for employment in the defense industry. ATDM was developed as a public-private consortium between the DoD, the Institute for Advanced Learning and Research (IALR), Danville Community College (DCC), Phillips Corporation, and The Spectrum Group in consultation with the defense industry. IALR is leading a multi-year pilot project to test and evaluate ATDM as a training platform for regional training centers supporting the defense industrial base. The pilot project is funded through the National Imperative for Industrial Skills initiative, which was launched in 2020 by the Industrial Base Analysis and Sustainment Program Office (IBAS) in the office of the Undersecretary of Defense for Acquisition and Sustainment.

About IALR

The Institute for Advanced Learning and Research serves Virginia as a regional catalyst for economic transformation through applied research, advanced learning, manufacturing advancement, conference center services, and economic development efforts. IALR’s major footprint focuses within Southern Virginia, including the counties of Patrick, Henry, Franklin, Pittsylvania, Halifax, and Mecklenburg, along with the cities of Martinsville and Danville. For more information, visit www.ialr.org.

ATDM Summit Tackles Skill Gaps in Defense Industrial Base to Support U.S. Navy

ATDM Summit Tackles Skill Gaps in Defense Industrial Base to Support U.S. Navy

 

U.S. Senator Warner serves as keynote speaker for inaugural event

The Department of Defense’s (DoD) Office of Industrial Policy, through its Industrial Base Analysis and Sustainment (IBAS) Program, welcomed key stakeholders to the first Accelerated Training in Defense Manufacturing (ATDM) Summit at the Institute for Advanced Learning and Research (IALR) in Danville, Va., on August 25. IALR is leading a three-year pilot project to develop, exercise and evaluate ATDM as a potential training platform for a network of regional training centers across the United States.

The ATDM Summit’s theme was “Workforce Challenges in Defense Manufacturing: ATDM – Meeting the Demand for Scale and Velocity.” The event introduced ATDM and discussed how this new program contributes to closing skills and manpower gaps that are impacting the ability of the defense industrial base to support America’s Navy. U.S. Sen. Mark R. Warner (D-VA) delivered the keynote speech.

“For years, I’ve been talking about the importance of addressing our nation’s chronic underinvestment in workers. Today, it’s more clear than ever that to maintain the capability of our military, and chart a strategic path forward, we will need to invest in the people who are going to make that possible. That’s our men and women in uniform as well as the civilians and industrial base who support them,” said U.S. Sen. Mark R. Warner (D-VA). “We need innovative approaches to workforce development – like IALR, like the ATDM program – to help make that happen.”

Other ATDM Summit presenters included Jesse Salazar, Deputy Assistant Secretary of Defense for Industrial Policy; Rear Admiral Scott Pappano, Program Executive Office, Columbia class submarine program; Adele Ratcliff, Director of Industrial Base Analysis and Sustainment Program; and Troy Simpson, Director of Advanced Manufacturing for IALR.

“As we continue to ensure our national security objectives are met, and that our warfighters have the platforms and systems they need to maintain free access across the maritime domain, I cannot overemphasize the significance of our defense industrial base workforce,” said Rear Admiral Pappano. “We have to demand the same levels of scale and urgency across our shipbuilding and ship sustainment trades as we do our Naval capability, capacity, and readiness…that is exactly what this program is designed to achieve.”

“The advances here in Danville have resonance far beyond shipbuilding and will enable the future of American production by cultivating the people who will build our country back better,” said Jesse Salazar, Deputy Assistant Secretary of Defense for Industrial Policy. “The ATDM model, led by Team Danville, will help the DoD scale American capacity to manufacture the exceptional parts, machines, and resilient supply chain materials our warfighters need.”

“The need for the level of training offered by ATDM has been clearly defined, especially in light of the country’s defense industrial base workforce needs,” said Mark Gignac, Executive Director of IALR. “We appreciate the support of Sen. Mark Warner and our other stakeholders which, in addition to support from the U.S. government, will be critical to scale the ATDM program model as we move forward. Much appreciation also goes to our partners, Danville Community College, Phillips Corporation, The SPECTRUM Group, and to funding provided by the Industrial Base Analysis and Sustainment Program.”

“The ATDM Summit showcases the power of a strong, rebounding community with great leadership,” said Dr. Brian Jackson, Vice President of Workforce Services for Danville Community College, the instructional provider for ATDM. “There are outstanding opportunities in Danville, and it was great to see leadership from around the country focusing on our community and our success.”

“Phillips Corporation is proud to participate with Team Danville in its quest to scale ATDM from its present Pilot stage to a national training program,” said Rick Morgan, Director of Phillips Corporation, the technology partner for ATDM. “We are convinced that ATDM will be a vital resource in addressing the widening gap of advanced manufacturing workers required to support the extensive supply chain needs of our nation’s Defense Industrial Base. The Summit demonstrated that we have achieved a strong alignment of local and national political and industry leaders in support of Team Danville’s ATDM initiatives.”

“ATDM demonstrates the power of public-private partnerships. It is a high-impact program at many levels,” said Charlie Dale, Partner, The SPECTRUM Group. “While addressing critical skill shortages in the defense industry, it provides extraordinary opportunities for a diverse group of women and men to begin careers in advanced manufacturing. Every ATDM student is a true pathfinder in the rebirth of manufacturing in America. SPECTRUM is very proud to be a member of Team Danville and passionate about ATDM’s mission to advance and grow America’s skilled workforce.”

In March 2020, the DoD launched the National Imperative for Industrial Skills (NIIS) Initiative to catalyze coordinated, multi-level public and private efforts across the nation’s industrial skills workforce development ecosystem. NIIS aims to close defense-critical workforce gaps, expand national production capacities, and improve U.S. industrial resiliency. ATDM is the flagship program in NIIS for training skilled workers for America’s defense industrial base in critical trades such as welding, CNC machining, metrology and additive manufacturing.

About ATDM

Accelerated Training in Defense Manufacturing is a prototype training platform for rapidly training skilled workers in key trades for employment in the defense industry. ATDM was developed as a public-private consortium between the DoD, the Institute for Advanced Learning and Research (IALR), Danville Community College (DCC), Phillips Corporation, and The SPECTRUM Group in consultation with the defense industry. IALR is leading a multi-year pilot project to test and evaluate ATDM as a training platform for regional training centers supporting the defense industrial base. The pilot project is funded through the National Imperative for Industrial Skills initiative which was launched in 2020 by the Industrial Base Analysis and Sustainment Program Office (IBAS) in the office of the Undersecretary of Defense for Acquisition and Sustainment. All training is conducted in Danville, Va. For more information, visit www.atdm.org.

See the following Flickr album link for images from the ATDM training facilities open house, the ATDM social and the ATDM Summit: https://flic.kr/s/aHsmWv2ova

 Visit https://youtu.be/egldO2Feeck for the ATDM overview video that was shared at the ATDM Summit.

Students, defense manufacturers, educators and supporters attend the Accelerated Training in Defense Manufacturing (ATDM) open house on Aug. 24 at Danville Community College, the instructional provider for ATDM. Stakeholders also participate in an evening social and the inaugural ATDM Summit the following day at the Institute for Advanced Learning and Research, the ATDM project leader. Sen. Mark Warner served as the keynote speaker at the summit, which focused on “Workforce Challenges in Defense Manufacturing: ATDM – Meeting the Demand for Scale and Velocity.”